By Syd Martin, owner of Crete Concepts · Published October 3, 2026
The short answer
A standard 200 sq ft concrete patio starts at $3,100 under normal site conditions. That covers 4-inch, 3,000 PSI fiber-reinforced concrete, stripping the sod, forming for proper drainage, a broom finish, control joints and cleanup when we're done.
From there, the price moves with size, upgrades and the site itself. The price calculator gives you a range for your patio in about a minute, and I confirm the final price after seeing the site in person.
What drives the price
- Size. More square footage means more concrete, forming and finishing time. Larger patios usually cost less per square foot than small ones, because setup and travel are spread over more area.
- Removing old concrete. If there's an old slab, cracked pavers or a broken patio in the way, it has to be broken out, loaded and hauled off before we can pour.
- Thickness. Four inches is standard for a patio. Going to 5 or 6 inches adds concrete and makes sense where something heavy will sit, like a hot tub or a future screen room.
- Wire mesh and stone base. Wire mesh adds reinforcement on top of the fiber. A compacted stone base gives the slab firmer support on soft or recently filled ground. Both add material and labor.
- 4,000 PSI concrete. A stronger mix costs more per yard. It's a good choice for areas that take more abuse or sit near salt water.
- Stamped finish. Stamping, color and sealer take more material, more crew and more time on pour day than a broom finish.
- Access. If the truck can back up to the forms, placing is simple. If the patio sits behind the house, past a pool cage or through a narrow side yard, it takes more labor or equipment.
- Slope and drainage. A flat yard is easy. A yard that slopes toward the house, or needs fill to get water moving the right way, adds prep work.
- Permits. Some patio projects need a permit and some don't. When one is required, the permit and the time it takes are part of the cost. We'll tell you whether your project needs a permit.
- Pump. When a truck can't get close enough, a concrete pump can place the concrete over the house or around obstacles. It's an added cost, but often the cleanest way to reach a backyard.
Small jobs are priced from photos
Not every project is a full patio. For jobs under 200 sq ft, like a grill pad, a small extension or a walkway section, send a few photos and rough measurements through the contact form. We price small jobs individually from the photos, so you don't have to wait for a site visit to get a number.
Broom finish or stamped in Florida heat
A broom finish is the standard for a reason. It has good traction when wet, it's the most affordable option, and it's easy to clean and repair. The trade-off is looks: it's plain concrete.
Stamped concrete gives you the look of stone, slate or brick, with color worked in. It costs more up front and needs a sealer that has to be reapplied over the years to keep the color and protect the surface. Sealed surfaces can get slick when wet unless a non-slip additive goes in the sealer, which is worth doing around a pool. Color matters in the sun, too: lighter tones stay cooler underfoot than dark ones.
If you want something in between, a broom-finish patio with a stamped border is a common compromise.
Concrete or pavers
Both are good options, and plenty of Cape Coral homes have each. Here's an honest look.
Pavers come in many shapes and colors, and a damaged paver can be lifted and replaced on its own. They can also be pulled up to reach a pipe underneath. On the other hand, the joints can collect weeds and ants, the sand needs topping off, and pavers on a base that wasn't compacted well can shift and settle over time.
Concrete is one continuous surface with no sand joints to maintain, and it's often less expensive up front for the same area. Concrete does crack; control joints are cut to guide where that happens, and good prep keeps it to a minimum. Repairs and additions won't match the color of the original slab exactly.
If you value low maintenance and a clean, solid surface, concrete is a strong choice. If you want design flexibility and easy spot repairs, pavers may suit you better.
How to compare quotes
Two quotes for the same patio can be far apart because they aren't for the same work. Ask every contractor, including us, these questions and get the answers in writing:
- Are you insured, and can I see proof of insurance?
- Who will actually be on site on pour day, and will the person I'm talking to be there?
- How thick will the slab be, and what PSI concrete are you ordering?
- What's going underneath it? Will the ground be compacted, and is a stone base included?
- What reinforcement is included: fiber, wire mesh, or both?
- How will you slope it for drainage, and where will the control joints go?
- Is removal of sod or old concrete included, and who hauls away the debris?
- What does cleanup include when the job is done?
- Is there a written scope that lists size, thickness, finish and everything included?
A lower number that leaves out the base, the haul-off or the cleanup isn't really lower.
Get your patio price
The fastest way to know where your project lands is the price calculator. Enter your size and options and you'll see a range in about a minute. I follow up personally, look at the site and confirm the price before anything is scheduled. If you'd rather talk it through, call me at 239-841-6404.
You can also see more about concrete patios and stamped concrete, or look through our recent projects.
Patio cost questions
How much does a 200 sq ft concrete patio cost in Cape Coral?
A standard 200 sq ft patio starts at $3,100 under normal site conditions, with 4-inch, 3,000 PSI fiber-reinforced concrete, sod stripping, forming, a broom finish, control joints and cleanup. Upgrades, removal and harder access add to that.
Does stamped concrete cost more than a broom finish?
Yes. Stamping takes more material, labor and time, and the sealer needs to be reapplied over the years. Many homeowners choose a broom-finish patio with a stamped border as a middle ground.
Can you pour a new patio over my old one?
In most cases we remove the old slab. Pouring over it raises the height, can block drainage and can carry old cracks up into the new concrete. We'll look at what's there and give you a straight answer.
Do I need a permit for a concrete patio?
Some patio projects need one and some don't, depending on the work. We'll tell you whether your project needs a permit when we look at it.